PIC16F676-I/SL

The PIC16F676-I/SL is a 8-bit Flash-based CMOS Microcontroller features 1 comparator and 128 bytes of EEPROM data memory. The PIC16F676 has a watchdog timer that is controlled by configuration bits. It runs off its own RC oscillator for added reliability. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72ms (nominal) on power-up only, designed to keep the part in Reset while the power supply stabilizes. There is also circuitry to reset the device if a brown-out occurs, which can provide at least a 72ms reset. With these three functions on-chip, most applications need no external Reset circuitry.

• Programmable pull-up resistors
• MPLAB® ICD-2 programming support or debugging support with optional header adapter
• 8 Oscillator selections including 4MHz RC oscillator with programmable calibration, power-on reset
• Power-saving sleep mode
• Interrupt-on-pin change
• Individual programmable weak pull-ups
• Programmable code protection
• High endurance flash/EEPROM cell

Rakendused

Automotive, Industrial, Consumer Electronics

Hoiatused

ESD sensitive device, take proper precaution while handling the device. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.