Prindi leht
BTS3134DATMA1
Power Load Distribution Switch, Low Side, 1 Output, 42 Vin, 24 A, 0.035 ohm, TO-252 (DPAK), 3Pin
Pilt on illustreeriv. Lugege toote kirjeldust.
TootjaINFINEON
Tootja toote nrBTS3134DATMA1
Tellimiskood4318913
Teise nimegaBTS3134D, SP000506210
Tehniliste andmete leht
Saadaval tellimiseks
Tootja standardne tarneaeg: 22 nädal(at)
Teavitage mind, kui toode on uuesti laos
| Kogus | |
|---|---|
| 2500+ | 0,945 € |
| 7500+ | 0,914 € |
Hind:Each (Supplied on Full Reel)
Minimaalne: 2500
Mitmekordne: 2500
2 362,50 € (KM-ta)
Lisage tootenr/ /tootemärkus
Lisatud teie tellimuse kinnitusele, arvele ja väljastusteatele ainult sellel tellimusel.
See arv lisatakse tellimuse kinnitusele, arvele, väljastusteatele, veebipõhisele kinnitusmeilile ja tootesildile.
Tooteteave
TootjaINFINEON
Tootja toote nrBTS3134DATMA1
Tellimiskood4318913
Teise nimegaBTS3134D, SP000506210
Tehniliste andmete leht
Power Load Switch TypeLow Side
No. of Channels1Channels
Input Voltage42V
Current Limit24A
On State Resistance0.035ohm
IC Case / PackageTO-252 (DPAK)
No. of Pins3Pins
Thermal ProtectionYes
On / Enable Input Polarity-
No. of Outputs1Outputs
Operating Temperature Min-40°C
Operating Temperature Max150°C
QualificationAEC-Q100
Product Range-
SVHCNo SVHC (21-Jan-2025)
Automotive Qualification Standard-
Distribution Switch Case StyleTO-252 (DPAK)
Toote ülevaade
BTS3134DATMA1 is a smart low-side power switch. It is an N-channel vertical power FET in smart SIPMOS technology. It is fully protected by embedded protection functions. It is used in all kinds of resistive, inductive, and capacitive loads in switching or linear applications, μC compatible power switch for 12VDC applications, and replaces electromechanical relays and discrete circuits.
- Logic level input, input protection (ESD), thermal shutdown
- Overload protection, short circuit protection, overvoltage protection
- Current limitation, analogue driving possible
- Drain source clamp voltage is 55V maximum at (Tj = - 40 to +150°C, ID = 10mA)
- Off-state drain current is 1.5μA typical at (Tj = -40 to +150°C, VDS = 32V, VIN = 0V)
- On state input current is 10μA typical at (Tj = 25°C)
- On-state resistance is 45Mohm typical at (VIN = 5V, ID = 3A, Tj = 25°C)
- Nominal load current is 3.5A minimum at (Tj <lt/> 150°C, VIN = 10V, TA = 85°C)
- Current limit is 24A typical at (VIN = 10V, VDS = 12V, tm = 200μs)
- Operating temperature range from -40°C to 150°C, TO252-3 package
Tehnilised andmed
Power Load Switch Type
Low Side
Input Voltage
42V
On State Resistance
0.035ohm
No. of Pins
3Pins
On / Enable Input Polarity
-
Operating Temperature Min
-40°C
Qualification
AEC-Q100
SVHC
No SVHC (21-Jan-2025)
Distribution Switch Case Style
TO-252 (DPAK)
No. of Channels
1Channels
Current Limit
24A
IC Case / Package
TO-252 (DPAK)
Thermal Protection
Yes
No. of Outputs
1Outputs
Operating Temperature Max
150°C
Product Range
-
Automotive Qualification Standard
-
Tehnilised dokumendid (1)
Seadusandlus ja keskkonnateave
Päritoluriik:
Riik, kus toimus viimane oluline tootmisprotsessPäritoluriik:Malaysia
Riik, kus toimus viimane oluline tootmisprotsess
Riik, kus toimus viimane oluline tootmisprotsessPäritoluriik:Malaysia
Riik, kus toimus viimane oluline tootmisprotsess
Tariifi nr:85423390
US ECCN:EAR99
EU ECCN:NLR
RoHS-ile vastav:Jah
RoHS
Vastab RoHS-i ftalaatide nõuetele:Jah
RoHS
Väga ohtlik aine:No SVHC (21-Jan-2025)
Laadige alla vastavussertifikaat
Toote vastavussertifikaat
Kaal (kg):.000726
Toote jälitatavus