Olete sisestanud esiletõstetud väljadele väärtuse, mis sisaldab sobimatuid märke. Vaadake oma valik üle, kasutades ainult sobivaid märke.

Toode ei pruugi olla täpne vaste teie otsitule

Ostsite varem selle toote. Vaadake tellimuste ajalugu



Battery Tester, Lead Acid, 6V to 60V, 132 mm, 199 mm, 60.6 mm, BT3554

HIOKI BT3554-51

Pilt on illustreeriv. Lugege toote kirjeldust.

Tootja toote nr:
Tehniliste andmete leht:
BT3554-51   Datasheet
Vaadake kõiki tehnilisi dokumente

Tootevaliku valija (BT3554)

Kõik oluline selle tootevaliku kohta


Kas te soovite näha sarnaseid tooteid? Valige lihtsalt allpool vajalikud omadused ja klõpsake nupule ×

Lead Acid

6V to 60V





Leia sarnaseid tooteid Valige ja muutke ülalolevaid atribuute, et leida sarnaseid tooteid.

Tehnilised dokumendid (4)

CAD-i allalaadimine


Sätted ja tingimused

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Nõustun Tühista

Toote ülevaade

Bundle of battery tester BT3554-50 and pin type lead 9465-10. Battery tester BT3554-50 sets a new standard for UPS and lead-acid battery diagnostics with measurement and recording guidance. Since the battery's internal resistance and voltage are measured using the impedance method, diagnostics can be performed while the battery is connected to its host device, without taking it offline. Proprietary noise reduction technology allows more accurate measurement even in noisy environments. When the BT3554-50 is paired with a dedicated mobile app (GENNECT Cross), the mobile device will provide audio guidance announcing the next battery number to be measured. This feature helps prevent erroneous measurements. You can also set up measurement locations informations and battery numbers in advance to create profiles to which measurement data and diagnostic results will be linked. This capability simplifies data management, even when performing diagnostic work on large numbers of batteries.
  • Accurately assess lead-acid battery deterioration using proprietary technology
  • Enjoy measurement guidance and easy data management functionality with the latest software
  • From measurement to recording as fast as 2 sec
  • Streamlined data management profiles
  • Measurement time is 100ms, response time is approximately 1.6sec
  • Product warranty is 3 years
  • USB, wireless communications (when Z3210 installed)
  • Auto power-off, auto memory function, auto-hold function
  • EN 61010-2-030 and EMC: EN 61326-1 safety compliance
  • Dimensions is 199W × 132H × 60.6Dmm (with protector Z5041 installed)


Battery tester, Pin type lead 9465-10, Carrying case C1014, Protector Z5041, Fuse set Z5050, 0 adj board, Neck strap, USB cable, GENNECT One software CD, AA alkaline battery (LR6) × 8, User manual.

Enim müüdud

32 Laos

3.01.23 seisuga on veel saadaval kogus 2

Tulevase varu reserveerimine

Tellige enne 18:00

Sinuga järgmisel tööpäeval

Teade mitte-käibemaksuga kliendile.

Kohalike seaduste tõttu saame tarnida ainult UK laost, s.t teile on saadaval ainult 29

1 949,00 €

Hind pole saadaval. Võtke ühendust klienditeenindusega.

Mitmekordne: 1 Minimaalne: 1
Kogus Hind Teie hind
1+ 1 949,00 €
Lepingujärgne hind
Veebipoe hind
Veebipoe lepingujärgne hind

Hind pole saadaval. Võtke ühendust klienditeenindusega.

No longer stocked:: No Longer Manufactured::
Lisa ostukorvi Lisa ostukorvi Eeltellimine
Piiranguga toode
Lisage tootenr/ /tootemärkus
Lõpphind: ( )
Lõpphind: --