MAX8556EVKIT

MAX8556EVKIT is a MAX8556 evaluation kit (EV kit) which is a fully assembled and tested surface-mount circuit board demonstrating the MAX8556 low-dropout (LDO) regulator. The EV kit comes assembled with a MAX8556ETE circuit that steps down a 1.425V to 3.6V input voltage range to a 1.2V output capable of sourcing up to 4A (limited by power dissipation). The MAX8556 features a POK output that goes high impedance once the output is within ±10% of its regulation value. The device utilizes an internal p-channel MOSFET for reduced dropout and quiescent current. In addition, the p-channel MOSFET eliminates the need for an external bias or noisy charge pump. The MAX8556 EV kit can also be used to evaluate the MAX8557 with no component changes. Suitable for Automated Test Equipment (ATE), networking, optical modules, point-of-load supplies, servers and storage devices and wireless base stations applications.

• Low dropout voltage (200mV max at 4A)
• Internal p-channel MOSFET pass transistor
• Power-OK (POK) output
• Fully assembled and tested
• Temperature range from 0°C to 70°C

Märkused

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party