LTC5800HWR-IPMA#PBF

LTC5800HWR-IPMA#PBF is a SmartMesh IP node 2.4GHz 802.15.4e wireless Mote-on-Chip. The LTC®5800-IPM is the IP mote product in the Eternal family of IEEE 802.15.4e System-on-Chip (SoC) solutions, featuring a highly integrated, low-power radio design by Dust Networks® as well as an ARM Cortex-M3 32bit microprocessor running Dust’s embedded SmartMesh IP networking software. The LTC5800-IPM SoC features an on-chip power amplifier (PA) and transceiver, requiring only power supply decoupling, crystals, and an antenna with matching circuitry to create a complete wireless node. With Dust’s time-synchronized SmartMesh IP networks, all motes in the network may route, source or terminate data, while providing many years of battery-powered operation. The SmartMesh IP software provided with the LTC5800-IPM is fully tested and validated and is readily configured via a software application programming interface.

• Time synchronized network-wide scheduling, per transmission frequency hopping
• Redundant spatially diverse topologies, network-wide reliability and power optimization
• >99.999% network reliability achieved in the most challenging RF environments
• Compliant to 6LoWPAN internet protocol (IP) and IEEE 802.15.4e standards
• Supply voltage range from 2.1V to 3.76V
• Supply noise is 250mV maximum at (requires recommended RLC filter, 50Hz to 2MHz)
• Frequency band range from 2.4000 to 2.4835GHz
• Raw data rate is 250Kbps max, differential non-linearity is 2.7mV max
• Operating temperature range from -55°C to 105°C
• 72-lead plastic QFN package