Prindi leht
712F-M4
Accelerometer, High-Frequency, Integral Cable, 0.1 V/g, 30 VDC, -50 °C to 120 °C, M4 Thread
Pilt on illustreeriv. Lugege toote kirjeldust.
Saadaval tellimiseks
Tootja standardne tarneaeg: 6 nädal(at)
| Kogus | |
|---|---|
| 1+ | 1 100,000 € |
Hind:Each
Minimaalne: 1
Mitmekordne: 1
1 100,00 € (KM-ta)
Lisage tootenr/ /tootemärkus
Lisatud teie tellimuse kinnitusele, arvele ja väljastusteatele ainult sellel tellimusel.
See arv lisatakse tellimuse kinnitusele, arvele, väljastusteatele, veebipõhisele kinnitusmeilile ja tootesildile.
Tooteteave
TootjaAMPHENOL WILCOXON
Tootja toote nr712F-M4
Tellimiskood4434442
Sensing Range - Accelerometer± 60g
Sensor MountingScrew Mount
Sensitivity Typ100mV/g
Supply Voltage Min18VDC
Supply Voltage Max30VDC
Sensitivity (V/g)0.1V/g
No. of Axes-
Sensor Case / Package-
No. of Pins-
Output Interface-
Operating Temperature Min-50°C
Operating Temperature Max120°C
Qualification-
Product Range-
SVHCTo Be Advised
Toote ülevaade
712F-M4 is a high frequency integral cable accelerometer. This high frequency accelerometer is used on machinery with gear mesh or small bearings, such as high-speed machine tool spindles and compressors. At high frequencies, there is little vibration in terms of displacement and velocity, however tremendous amounts of acceleration amplitudes may be present.
- Corrosion resistant, hermetic seal, ground isolated, reverse wiring protection, ESD protection
- Compact size, lightweight, high frequency detection (25KHz), manufactured in ISO 9001 facility
- 100mV/g sensitivity at (±10%, 25°C ), 60g peak acceleration range, 1% amplitude nonlinearity
- 45KHz resonance frequency, mounted, 3% of axial max transverse sensitivity
- Voltage source range from 18 to 30VDC, current regulating diode range from 2 to 10mA
- 100 ohm maximum output impedance, 12VDC nominal bias output voltage
- Vibration limit is ±1,000g, shock limit is 5,000g peak maximum
- 316L stainless steel case material, J9T2AK, 16 ft, blunt cut internal cabling
- M4 captive screw with 0.047” diameter safety wire hole mounting
- Operating temperature range from -50° to +120°C
Sisukord
High frequency integral cable accelerometer, M4 captive screw, Calibration data (level 2).
Tehnilised andmed
Sensing Range - Accelerometer
± 60g
Sensitivity Typ
100mV/g
Supply Voltage Max
30VDC
No. of Axes
-
No. of Pins
-
Operating Temperature Min
-50°C
Qualification
-
SVHC
To Be Advised
Sensor Mounting
Screw Mount
Supply Voltage Min
18VDC
Sensitivity (V/g)
0.1V/g
Sensor Case / Package
-
Output Interface
-
Operating Temperature Max
120°C
Product Range
-
Seadusandlus ja keskkonnateave
Päritoluriik:
Riik, kus toimus viimane oluline tootmisprotsessPäritoluriik:United States
Riik, kus toimus viimane oluline tootmisprotsess
Riik, kus toimus viimane oluline tootmisprotsessPäritoluriik:United States
Riik, kus toimus viimane oluline tootmisprotsess
Tariifi nr:90318080
US ECCN:EAR99
EU ECCN:NLR
RoHS-ile vastav:Y-Ex
RoHS
Vastab RoHS-i ftalaatide nõuetele:Jah
RoHS
Väga ohtlik aine:To Be Advised
Laadige alla vastavussertifikaat
Toote vastavussertifikaat
Kaal (kg):.035