Olete sisestanud esiletõstetud väljadele väärtuse, mis sisaldab sobimatuid märke. Vaadake oma valik üle, kasutades ainult sobivaid märke.

Toode ei pruugi olla täpne vaste teie otsitule

Ostsite varem selle toote. Vaadake tellimuste ajalugu

 
 

A15336-01

Thermal Pad, Tflex 300 Series, 1.2 W/m.K, Silicone Elastomer, 4 mm, 229 mm

LAIRD A15336-01

Pilt on illustreeriv. Lugege toote kirjeldust.

Tootja toote nr:
A15336-01
Tellimiskood:
2484736
Tootevalik
Tflex 300 Series
Tehniliste andmete leht:
A15336-01   Datasheet
Vaadake kõiki tehnilisi dokumente

Tootevaliku valija (Tflex 300 Series)

Kõik oluline selle tootevaliku kohta

Tooteteave

Kas te soovite näha sarnaseid tooteid? Valige lihtsalt allpool vajalikud omadused ja klõpsake nupule ×


:
1.2W/m.K

:
Silicone Elastomer

:
4mm

:
-

:
-

:
229mm

:
229mm

:
Tflex 300 Series

Leia sarnaseid tooteid Valige ja muutke ülalolevaid atribuute, et leida sarnaseid tooteid.

Tehnilised dokumendid (1)

CAD-i allalaadimine

×

Sätted ja tingimused

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Nõustun Tühista

Toote ülevaade

The A15336-01 is a 4mm Thermal Gap Filler with unique silicone gel offers compliancy and thermal resistance at pressures of 50psi will deflect to over 50% the original thickness. This high rate of compliancy allows the material to totally blanket the component, enhancing thermal transfer. The material has a very low compression set enabling the pad to be reused many times. Tflex™ 300, in achieving its stellar compliancy, does not sacrifice thermal performance. With a thermal conductivity of 1.2W/mK, low thermal resistances can be achieved at low pressures. Tflex™ 300-H is offered with a hard, metalized liner option for easy handling and improved rework. The metalized liner's lower coefficient of friction also allows for easy assembly of parts that must slide together, such as a card into a chassis. It is suitable for flat panel displays, memory modules, set top box, lighting ballast, handheld electronics, optical disk drives and vibration dampening applications.
  • Extreme compliancy allows material to totally blanket components
  • Low compression set enables the pad to be reused many times
  • UL94V-0 Flammability rating
  • -40 to 160°C Operating temperature
  • ±10% Thickness tolerance
  • 0.56% Out-gassing TML
  • 0.10% Out-gassing CVCM
  • 600ppm
  • c Coefficient thermal expansion (CTE)

Rakendused

Thermal Management, Communications & Networking, Computers & Computer Peripherals, Power Management, Lighting, LED Lighting, Automotive

Enim müüdud

Saadaval reservtellimisega

Rohkem kaupa saadaval tarnija tarneaegadel, mis on umbes 10.01.22

Teavitage mind, kui toode on uuesti laos

50,52 €

Hind pole saadaval. Võtke ühendust klienditeenindusega.

Hind:
Each
Mitmekordne: 1 Minimaalne: 1
Kogus Hind Teie hind
 
 
1+ 50,52 €
Kampaaniahind
Lepingujärgne hind
Veebipoe hind
Veebipoe lepingujärgne hind
 
5+ 42,94 €
Kampaaniahind
Lepingujärgne hind
Veebipoe hind
Veebipoe lepingujärgne hind
 
10+ 37,34 €
Kampaaniahind
Lepingujärgne hind
Veebipoe hind
Veebipoe lepingujärgne hind
 
20+ 36,59 €
Kampaaniahind
Lepingujärgne hind
Veebipoe hind
Veebipoe lepingujärgne hind
 
 
 

Hind pole saadaval. Võtke ühendust klienditeenindusega.

No longer stocked:: No Longer Manufactured::
Lisa ostukorvi Lisa ostukorvi Eeltellimine
Lisa
Piiranguga toode
Lisage tootenr/ /tootemärkus
Lõpphind:
Lõpphind: ( )
Lõpphind: --