Low

MC9S08PA4AVTG - 

8 Bit Microcontroller, EEPROM with TSI, MC9S08, 20 MHz, 4 KB, 512 Byte, 16 Pins, TSSOP

NXP MC9S08PA4AVTG

Pilt on illustreeriv. Lugege toote kirjeldust.

Tootja:
NXP NXP
Tootja toote nr:
MC9S08PA4AVTG
Tellimiskood:
2450216
Tootevalik
S08 Microcontrollers
Tehniliste andmete leht:
(EN)
Vaadake kõiki tehnilisi dokumente

Tooteteave

:
MC9S08
:
UART
:
14I/O's
:
4KB
:
16Pins
:
S08 Microcontrollers
:
-
:
20MHz
:
2.7V
:
TSSOP
:
Cut Tape
:
5.5V
:
512Byte
:
MSL 3 - 168 hours
Leia sarnaseid tooteid Valige ja muutke ülalolevaid atribuute, et leida sarnaseid tooteid.

Toote ülevaade

The MC9S08PA4AVTG is a 8-bit Microcontroller based on enhanced S08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 20MHz. The device incorporates 4kB internal flash, 0.512kB internal RAM, 8-channel 12-bit A/D converter and 14 general-purpose I/O pins. This device also features peripherals like one serial communication interface (SCI/UART) module and 16-bit real timer counter (RTC). The device operates from 2.7 to 5.5V.
  • Supporting up to 40 interrupt/reset sources
  • Supporting up to 4-level nested interrupt
  • Flash and RAM access protection
  • One low-power stop mode; reduced power wait mode
  • Peripheral clock enable register can disable clocks to unused modules
  • Loop-controlled pierce oscillator (XOSC)
  • Internal clock source (ICS) - Containing a frequency-locked-loop (FLL)
  • Watchdog with independent clock source
  • Low-voltage detection with reset or interrupt - selectable trip points
  • Illegal opcode detection with reset
  • Illegal address detection with reset
  • Single-wire background debug interface
  • Breakpoint capability to allow three breakpoints setting during in-circuit debugging
  • On-chip in-circuit emulator (ICE) debug module
  • FTM - two 2-channel flex timer modulators modules
  • 1 x 8-bit Keyboard interrupt module (KBI)
  • Two ultra-high current sink pins supporting 20mA source/sink current

Rakendused

Industrial

Seotud tooted